The box not updating
Planner rebuild This will rebuild your planner and fix problems with using the system and recording issues.
Press TV Guide and select settings in the top menu.
Somehow PI's Calculate method was no longer running during the normal workbook recalculate.
In Settings I had to change Automatic Update command to Full Calculate and then back again.
I have done much research over the years on fixing problems with SKY boxes and every useful method is listed below. The problem got worse and worse until it came to a point I had to unplug the power cable, wait 10 seconds and plug it back in, wait another 2 minutes and power it up.
There are four options to fix a faulty Sky, Sky or Sky HD box, but if your box won’t turn on I recommend you skip to option 4. I had to use that procedure just to change channel!!
I can only assume that somehow the file had become corrupted.
I changed the setting as indicated above; but the auto-recalculate still did not work, and upon rechecking the "Calculation" option, found it had reset itself back to "Manual" all by itself.
Three attempts later and it was still adamant it wanted to be "Manual" and nothing else.
As in step one, access the secret menu but this time select RESET and follow the onscreen instructions.
After the reset is complete wait 2 or 3 minutes then test the system.